PVK Industrial Vacuum Sealer

Vacuum Options

• Multi-Stage: up to two vacuum and two gas cycles, to achieve lower residual oxygen level
• Vacuum Reserve Tank: shortens vacuum time by increasing vacuum pressure at cycle start
• Vacuum Level Sensor: ensures consistent vacuum levels are achieved every cycle
• Vacuum Relief Valve: sets a maximum vacuum level to prevent product damage
• Venturi Vacuum Pump: for quiet operation and low maintenance
• Nozzle Extend Control: manually extend vacuum nozzles, for bulky bags
• Longer Vacuum Nozzles

Seal Options

• Bag Stretcher: fingers fit inside edges of the bag to minimizes wrinkles in the seal area
• Workshelf Bag Support: supports the product during the packaging cycle
• SureTemp Temperature Controller: ensures consistent seal quality (up to 350°F)
• Water Cooling: prevents excessive heat build up in the jaws during high speed sealing
• High Pressure Seal: increases seal pressure for heavy materials and gusseted bags
• Extra Seal Power: additional seal transformer for continuous production at high rates
• Seal Only Switch: retracts nozzles for use as a bag sealer (no vacuum)
• Seal Jaw Selector Switch: allows bottom seal jaw to be turned off
• Bag Stop: allows bag to always be sealed in the same location

Safety Options

• Emergency Stop Button
• Two Stage Cycle Engagement: jaws close by foot pedal, cycle initiated by dual palm buttons
• Locking Control Box Cover: cover on control cabinet to prevent unauthorized setting changes
• Dual Palm Buttons: prevent operator contact with seal jaws during closure
• Motorized Crank Adjustable Frame: adjust the operating height of the machine for improved ergonomics

Other Options

• NEMA Enclosure: isolate electrical and pneumatic components from environmental conditions
• Ported Exhaust: for plumbing exhaust out of a cleanroom
• Stainless Steel Construction: for wet or corrosive environments
• Pallet Packaging Configuration (50” support spacing, 25” seal bar overhang)
• Integrated Air Compressor
• CE Compliant
• Casters