PVB Constant Heat Vacuum Sealer

Vacuum Options

• Multi-Stage: up to two vacuum and two gas cycles, to achieve lower residual oxygen level
• Vacuum Level Sensor: ensures consistent vacuum levels are achieved every cycle
• Vacuum Relief Valve: sets a maximum vacuum level to prevent product damage
• Venturi Vacuum Pump: for quiet operation and low maintenance
• Nozzle Extend Control: manually extending vacuum nozzles, for bulky bags
• Larger Nozzles: for vacuuming the air out of the bag faster
• Profiled Nozzles: narrow radius on nozzles for more vacuum on thick materials

Seal Options

• Bag Stretcher: fingers fit inside edges of the bag to minimizes wrinkles in the seal area
• Teflon Jaw Cover
• Bi-Acitve (both jaws heated) seal – 3/4″ flat seal or 1/2″ serrated seal
• Serrated Seal – 1″ or 1/2″
• Workshelf Bag Support: supports the product during the packaging cycle
• Seal Only Switch: retracts nozzles for use as a bag sealer (no vacuum)
• Bag Stop: allows bag to always be sealed in the same location

Safety Options

• Emergency Stop Button
• Two Stage Cycle Engagement: jaws close by foot pedal, cycle initiated by dual palm buttons
• Locking Control Box Cover: cover on control cabinet to prevent unauthorized setting changes
• Dual Palm Buttons: prevent operator contact with seal jaws during closure
• Motorized Crank Adjustable Frame: adjust the operating height of the machine for improved ergonomics

Other Options

• Hot Embosser: up to 8 brass characters 3/8″ above the seal
• Hot Stamp Printer: hot embosser with thermal transfer ribbon
• NEMA Enclosure: isolate electrical and pneumatic components from environmental conditions
• Ported Exhaust: for plumbing exhaust out of a cleanroom
• Stainless Steel Construction: for wet or corrosive environments
• Short Stand: allows machine to be fastened down to a table (requires venturi vacuum)
• Integrated Air Compressor
• 230V Operation
• CE Compliant
• Casters