Search
Close this search box.

Med Vac Validatable Medical Vacuum Sealer

The PAC Med Vac sealer is a fully validatable medical vacuum sealer designed to comply with the stringent guidelines of ISO 11607 terminally sterile packaging requirements. This industrial grade sealer is intended for medical and other industrial applications where control of process parameters is critical and seal validation is required. External verification ports allow for easy verification and calibration of internal controllers for IQ/OQ processes.

The Med Vac line of validatable sealers are capable of producing consistent hermetic seals in a wide range of materials. Temperature control coupled with digital seal and cool timers, provide the ability to dial in settings for almost any pouch or bag sealing application. Standard bi-active sealing jaws and jaw selector switch enable use with single or double sided heat giving the versatiltiy to seal tyvek ™, heavy foils, and/or more complex materials. A Seal-Only switch retracts the vacuum nozzles from the sealing jaws to permit unobstructed use as an impulse sealer.

The PAC Med Vac is equipped with a venturi vacuum pump with 10.2 cubic feet per minute of flow to provide fast, efficient removal of air from most packages. A 1/4 hp electric vacuum pump is available in place of a venturi style or an optional 3/4 hp electric pump for more demanding applications. Digital timers allow for precise independent control of vacuum and/or gas flush (2 vacuum and 2 gas flush cycles). Optional multi-stage cycle will allow for continuous cycles of vacuum and gas or gas and vacuum. This method will often produce lower residual oxygen levels faster than long-duration single vacuum and gas flush cycle.

Packaging Aids Med Vac validatable medical vacuum sealer is available in 18″ – 48″ seal lengths and can be configured with an array of options to meet the specific requirements of almost any vacuum sealing application.

Manufactured in the USA and includes a 3 year limited warranty.

Leasing Options from $330/month

Supplier:

Features

Sealing Features:

  • Seal Lengths: 18″, 24″, 30″, 36″, 48″ (Twin head, 4 vacuum nozzles)
  • Seal Width: 5/16″
  • Bi-active jaws (top and bottom heated bars) with selector switch permitting heat from either or both jaws
  • Pneumatically operated sealing jaws for high pressure sealing
  • Independent digital seal and cool timers
  • Digital sealing pressure switch with adjustable band to set high and low tolerances
  • Seal Only switch to disable vacuum and retract the nozzle for use as an impulse sealer

Temperature Control Features:

  • Temperature controller with digital readout to 350° F, accurate to +/- 3° F (high temp optional)
  • Dual thermocouple sensors monitor heated jaws selected by operator (Top, Bottom, or Both)
  • Adjustable temperature band for high and low alarm tolerances
  • Seal time begins when set temperature is achieved to prevent inconsistencies with heat build up in sealing jaws, ensuring repeatable seals

Vacuum Gas Flush Features:

  • Venturi Vacuum pump for quiet operation and fast evacuation of air (1/4 hp and hp electric vacuum pumps optional)
  • Dual Vacuum/Gas Flush Nozzles (snorkels) to accommodate narrow or wide bags
  • Digital timers for each stage of vacuum and gas flush (when applicable), up to 10 seconds
  • Up to 2 stages of vacuum and 2 stages of gas flush

MedPAC Medical Control Features:

  • ISO 11607 Compliant
  • Fully calibratable pressure switch and temperature controller
  • External ports in control cabinet for verification and calibration of internal controllers
  • Real time seal process parameter monitoring (Temperature, Pressure, Time)
  • Alarm function prevents operation when there is a deviation from validated settings

Safety Features:

  • Pneumatic low-pressure jaw close with release if obstruction is detected
  • Jaw close time out with release when delay is detected
  • Heavy duty seal transformer(s) with thermal overload protection
  • Emergency stop button on control panel

Versatility:

  • Stainless Steel frame and cabinet for ease of cleaning and sterilization
  • Locking Control Box cover to prevent unauthorized access to adjust settings
  • Ported Exhaust for plumbing exhaust outside of a cleanroom to prevent contamination
  • Adjustable sealing head position for vertical to horizontal use (Crank adjustable height optional)
  • Designed to effectively package medical devices in a wide variety of bag materials

Specs:

  • Foot switch cycle activation (Dual palm control optional)
  • Air Requirement (min): 100 psi
  • Electrical Requirement: 115v standard (230v optional)
  • 3 year limited warranty
  • Made in USA

Specs

  • Muti-stage Vacuum / Gas cycles permitting greater oxygen removal for modified atmosphere packaging
  • Vacuum Level Switch with probe for consistent levels in each package
  • Vacuum Relief Valve to prevent product damage
  • Foot switch vacuum to control cycle duration based on visual package appearance
  • Double Set-Point Temperature Controller (Seal Temp / Cool Temp)
  • Extra Power / Higher Duty Cycle (12″ / 18″ / 24″ seal lengths)
  • Verification timer plugs into time port for displaying and verifying actual seal time
  • Motorized Crank Adjustable Frame to position sealing head
  • Locking Swivel Casters to permit easily moving machine to different locations
  • Bag Stretcher to assist proper fitting of bags into seal jaws avoiding wrinkles in the seal area
  • Stainless Steel Workshelf simplifies bag positioning by supporting the product
  • Stainless Steel Bag Support used in conjunction with workshelf
  • Dual Palm Control (Anti-tie down) cycle activation
  • Two-Stage Cycle activation. Jaws closed under low pressure by foot switch for bag positioning, cycle activated by dual palm switches

Videos

 
 

 

 

Resources

Options

Get a quote

Unique solutions to your complex packaging problems

With quick turnaround times, rush services, and a high-volume capacity, there’s no project we can’t handle! Get in touch for:

Related products
Scroll to Top