Search
Close this search box.

Electro Pac Lite Tabletop Vacuum Sealer

The Electro Pac Lite tabletop vacuum sealer is designed for the most critical packaging needs with seal temperature controlled for a perfect seal, every time. This vacuum sealer is available in seal lengths of 20″, 25″, and 30″. The Electro Pac Lite has a 5/16″ wide seal element in each jaw to effectively seal foil, laminates, and other thick materials. Standard on this vacuum sealer is ported exhaust, which combines all exhaust air into one port that can be vented outside a cleanroom. Designed for venting outside a cleanroom.

The Electro Pac Lite tabletop vacuum sealer is made in the USA and includes a 2 year limited warranty.

Leasing Options from $180/month
Supplier:

Features

Sealing

  • Seal Length: 20″, 25″, 30″
  • Seal Width: 5/16″
  • Bi-active Seal: top and bottom heated seal bars for thick materials or reducing seal time
  • Seal Only Switch: retracts nozzles for use as a bag sealer (no vacuum)
  • Pneumatically-operated seal jaws for high pressure sealing
  • Suretemp™ Impulse Temperature Controller: ensures consistent seal quality (up to 350°F)
  • Independent timers for vacuum, gas, seal, and cool (up to 12s vacuum, 3s gas, seal, and cool)
  • Foot pedal cycle activation

Vacuum System

  • Fast, quiet venturi vacuum system
  • Stainless steel vacuum nozzle
  • Gas flush after vacuum, if required

Versatility

  • Individual controls allow vac only, gas flush only, gas flush after vac, vac after gas flush
  • Ported Exhaust: for plumbing exhaust out of a cleanroom
  • Designed to safely package electronics in a variety of bag materials

Safety

  • Low pressure jaw closing system
  • Automatic jaw interference release

Specs

  • Air requirement (min): 100 psi
  • Electrical requirement: 115V
  • Dimensions: 23″ – 33″ W x 8″ H x 15″ D

Specs

Videos

Resources

Options

Vacuum Options

  • Multi-Stage: perform up to two vacuum and gas cycles to achieve a lower residual oxygen level
  • Vacuum Level Sensor: ensures consistent vacuum levels are achieved every cycle
  • Vacuum Relief Valve: sets a maximum vacuum level to prevent product damage
  • Dual Stainless Steel Nozzles: for vacuum packaging two bags at a time

Seal Options

  • Seal Jaw Selector Switch: allows bottom seal jaw to be turned off

Other Options

  • Stainless Steel Construction: for wet or corrosive environments
  • Floor stand: for use on the floor instead of on a table
  • Workshelf: supports the product during the packaging cycle (20″ wide x 8″ deep)
  • 220V operation
  • CE compliant

Get a quote

Unique solutions to your complex packaging problems

With quick turnaround times, rush services, and a high-volume capacity, there’s no project we can’t handle! Get in touch for:

Related products
Scroll to Top